Boeing 737 MAX 10 vs. Boeing 787-8

The Boeing 737 MAX 10 is the largest variant in the 737 MAX series, representing Boeing's expansion of its narrow-body, twin-engine offerings for the commercial aviation market. Launched in 2017, the MAX 10 was developed in response to airlines demanding a larger model than the MAX 9. The announcement for the MAX 10 was quickly followed by 240 orders and commitments from more than ten customers. The United States' aviation regulator, the FAA, cleared Boeing to begin certification flight testing of its 737 MAX 10 in November of 2023. Deliveries are being anticipated for early 2025.

The 737 MAX 10, with its extended fuselage, offers a greater passenger capacity compared to its siblings in the MAX series at 143 feet (43.79 meters). This increase in size allows airlines to accommodate more passengers per flight, optimizing efficiency and profitability, particularly on popular short to medium-haul routes. Equipped with advanced CFM International LEAP-1B engines, the MAX 10 delivers over 58,000 pounds of thrust. The slight stretch of the MAX 10 allows the jet to retain the existing wing design and LEAP engines from the MAX 9, with a trailing-link main landing gear being the only major change.

In the market, the Boeing 737 MAX 10 competes with aircraft like the Airbus A321neo. Both are very similar in terms of seating capacity, and range, but the MAX 10 does fall short in terms of field performance. Boeing predicts that the MAX 10 will yield a 5% lower trip cost and seat cost compared to the A321neo. It provides airlines with an alternative option in the narrow-body segment, offering a balance of capacity, range, and efficiency.

Various airlines have shown interest in the 737 MAX 10 for its ability to meet the demands of modern air travel. It is expected that United Airlines, Korean Air, Alaska Airlines, and Ryanair will have some of the largest fleets of MAX 10s. The MAX 10's capabilities make it an attractive choice for carriers looking to expand their network and serve densely populated routes efficiently.

The Boeing 787-8, as the first variant of the revolutionary 787 Dreamliner series, marked a new chapter in commercial aviation when it took to the skies in 2009. This modern wide-body twinjet made its introduction into commercial aviation in 2011 with All Nippon Airways. Since then, the entire Dreamliner family has been pivotal for efficient, point-to-point routes.

Spanning 56.7 meters (186.1 feet) in length with a wingspan of 60.1 meters (197.2 feet), the 787-8 is distinguished by its sleek and aerodynamic design. The aircraft boasts a wing area of 377.0 square meters (4058.0 square feet), which plays a critical role in its fuel-efficient performance. One of the most notable features of the 787-8 is its extensive use of composite materials, including carbon fiber reinforced polymer, accounting for a significant portion of its primary structure. This use of advanced materials results in a lighter airframe, leading to reductions in fuel consumption and operational costs, while also enhancing structural strength and durability. From the outside, 787s are discernible by their rounded noses, raked wingtips, and engine chevrons (serrated edges).

Equipped with either General Electric GEnx or Rolls-Royce Trent 1000 engines, the 787-8 offers a total maximum thrust of 560.0 kN (128,000 lbf). These engines, combined with the aircraft's optimized aerodynamics, enable it to achieve a range of approximately 13,620 kilometers (7,354 nautical miles). This extended range, coupled with its fuel efficiency, makes the 787-8 a viable option for airlines to operate long-haul flights with lower environmental impact.

Inside, the Boeing 787-8 typically seats 242 passengers in a standard three-class configuration, but it can accommodate up to 381 passengers in a high-density setup. The cabin of the 787-8 has been designed with passenger comfort at its core, featuring larger windows that are electronically dimmable, higher humidity levels, and a lower cabin altitude pressure. These features significantly enhance the passenger experience, particularly on long-duration flights, by reducing fatigue and improving overall comfort.

The 787-8 competes in the commercial aviation market with aircraft such as the Airbus A330-900neo. Its introduction was a strategic move by Boeing to provide airlines with an aircraft that combines operational efficiency with advanced passenger comfort amenities. The aircraft's innovative design and environmental considerations have made it a preferred choice for various airlines, including All Nippon Airways, United Airlines, Air Canada, Etihad Airways, and LATAM Chile. These carriers have utilized the 787-8's capabilities to effectively serve a broad range of international and transcontinental routes.

The development and deployment of the Boeing 787-8 have been characterized by a shift towards more sustainable and efficient air travel. Its use of cutting-edge materials, coupled with state-of-the-art systems, represents a significant advancement in aircraft design. As a result, the 787-8 has set new standards in terms of operational efficiency, reduced carbon emissions, and enhanced passenger comfort, thereby playing a pivotal role in the evolution of modern long-haul aviation.